The AGDS-2 EM is a single or two-channel gas detection system designed for use in boiler houses and pellet stores. Up to 2 low voltage sensors can be connected for the detection of natural gas, LPG or carbon monoxide.
In the event of a high alarm from one of the sensors, the system will isolate a connected control valve. A low alarm indication is also given.
Panel controls included ‘Mute’ and ‘Reset’ buttons.
Remote emergency stop buttons can be fitted and a fire alarm connected to close the gas valve when activated.
High alarm change over relay can be used to control remote indications or connect to a BMS system.
| Product Dimensions | 180mm x 130mm x 70mm |
|---|---|
| Gas Detection | The panel can except a maximum of two detectors. The current range is: Methane/Natural Gas (CH4), Propane (C3H8), Carbon Monoxide (CO) |
| Alarm Types | Fixed low and high alarm peak levels, high alarm activation will latch and isolate the connected gas valve. |
| Peak Alarms | Methane/Natural Gas (CH4) & Propane (C3H8) • 5% low alarm • 10% high alarmCarbon Monoxide (CO) • 80PPM Low Alarm • 100PPM High Alarm |
| Warranty | Medem’s industry leading five-year warranty is a demonstration of the company’s confidence in the quality and design of our products.
This applies to the main panels and sender units, gas detectors carry a two-year warranty. |
| Service | The panel and sensors must be re-commissioned and tested every 12 months as a minimum but with consideration of every 6 months dependant on gas type and environment. |
Unit G8, Block G, Calmount Business Park Ballymount, Dublin, D12 NH01, Ireland
Tel: 01 461 4300
Fax: 01 459 2329
Email: sales@modernplant.ie
